Fire Products < anekaproduk.co.id

Style 201. In-Line Foam Eductor

Features :

Rugged All Brass Construction

1-1/2" or 2-1/2" Awivel Inlet X 1-1/2" Male Outlet

The Eductor Is Rated To Flow AT 200 PSI (14 Bar) Inlet Pressure and Work Well With Nozzles Rated 75 PSI and 100 PSI (5 Bar and 7 Bar)

Furnished With Reinforced Clear PVC Pickup Hose To Prevent Kinking

Check Ball To Prevent Back Flow Into The Foam Concentrate

Detachable Metering Device For Cleaning

Metering Valve with 5 settings : 1/2%, 1%, 3%, 6% and 0 (Shut off)

Works With Most Foam Concentrates

Style 332. Multi-Purpose Nozzle 1" or 1.5" Inlet

Features :

providing The Combination of Solid Stream And Fog Pattern At The Same Time Or Independently

Advantages of Solid Bore Reach, Penetration, High Volume and Low Pressure With Fog Stream Without Shutdown

Operate Efficiently At Pressure As Low As 50 PSI (3.5 BAR)

Twist Shutoff of the Fog Stream, Ball Shutoff of the Straight Stream

Infinite Patterns Detents For Positive PositioninG

CAFS Capability

Suitable for Multiple Applications of Interior, Exterior, Foam, Penetration, Protection and Ventilation

Style 333. Multi-Purpose Nozzle 1" or 2.5" Inlet

Features :

Providing The Combination of Solid Stream And Fog Pattern At The Same Time or Independently

Advantages of Solid Bore Reach, Penetration, High Volume and Low Pressure Operation with Fog Protection and Cooling

Solid Bore Stream to Fog Stream Without Shutdown

Operate Efficiently At Pressure As Low As 50 PSI (3.5 BAR)

Style 366. Adjust Flow Nozzle 1.5"

Features :

Strong Lightweight Aluminium Construction

Constant Selectable Gallonage---Flow Remains Constant In All Patterns

Change Flow Without Changing Pattern and Flush Without Shutting Down

Multiple Pattern Detents for Positive Pattern Positioning

Tight Straight Stream and 110° Wide Dense Fog Pattern

Quality Stream Performance Even At low Pressure

Replaceable Spinning Teeth

Excellent for Use with Eductor and Foam Tube

Conforms to All Aspects of NFPA 1964 Standard

Style 368. Adjust Flow Nozzle 2.5" Inlet

Features :

Strong Lightweight Aluminium Construction

Constant Selectable Gallonage---Flow Remains Constant In All Patterns

Change Flow Without Changing Pattern and Flush Without Shutting Down

Multiple Pattern Detents for Positive Pattern Positioning

Tight Straight Stream and 110 Degree Wide Dense Fog Pattern

Quality Stream Performance Even At low Pressure

Replaceable Spinning Teeth

Excellent for Use with Eductor and Foam Tube

Conforms to All Aspects of NFPA 1964 Standard

Style 823. Master Stream Nozzle 2-1/2" Inlet

Features :

Rugged All Brass Construction

Flow Remains Constant In All Patterns

Combination of Fog and Straight Stream

Factory Set at 500 GPM --- Can be changed to 300 or 700 GPM In the Field

"Built-In" Grid stream shaper for maximun reach

Grease Fitting for Easy Maintenance

Excellent for Industrial and Marine Use

Style 520 BC. Leader Line WyeInlet : 2.5" FemaleOutlet : Two 1.5" Male

Features :

Rugged Brass Construction

Designed for Heavy duty use

Male adapters are Easily removed for Adjustment of seats

Body painted red

Style 600. Personal Portable Monitor 2-1/2" Inlet x 2-1/2" Outlet500 GPM

Features :

Simple & Quick attack operation, operate like handline while delivering much more water

Highly maneuverable

Low profile design for stable operation

Unmanned operation at fire scene to save manpower

Compact size & light weight (only 7 Kgs)

Flow range up to 500 GPM (1900 LPM)

Elevation is Adjustable between 30° to 60° unmanned down to 20 degree when manned

Horizontal Rotation is Adjustable 20 degree either side of center

Ball Shutoff with locking handle

Compact folding legs for easy storage

The monitor body is hard coated anodizedaluminum with tough powder coating inside and out

Carbide tip spikes on base support for long term wear resistance and ground stability

Large handle for easy carry around

Style 636. Station Monitor 2.5" Waterway750 GPM

Features :

Rugged, corrosion-resistant cast brass construction

Full 360° horizontal and 130° vertical travel 70° above to 60° below horizontal

Brass twist locking mechanizm for vertical and horizontal movement

Vertical movement controlled by Stainless steel handle rod

Excellent for use in industrial and marine applications

Easily operated even under high pressure

Option / Accesories :

Master Stream Nozzle

Foam Nozzle

Style 649. Station Monitor 3" Waterway1.250 GPM

Features :

Corrotion resistant brass construction

Full 360° horizontal travel with friction locking mechanism

150° Vertical travel - 90° above to 60° below horizontal

3" Single waterway with turning vanes at each elbow provides flow efficiency

Low friction loss : 10 PSI at 800 GPM

A double row of ball bearings in the swivwl for smooth operation

Suitable for use in corrosive atmosphere that requires all-brass monitor

Standard unit painted red

Options / Accesories :

Master stream nozzle

Master stream foam nozzle

Pressure gauge

Style 736. Station Monitor 2.5 Waterway750 GPM

Features :

Construction of Corrosion-Resistant Seamless Brass Tubing

135° vertical travel (90° above and 45° below) Controlled by Stainless steel handle rod

Full 360° horizontal travel

Positive twist locks for vertical and horizontal movement

Cast brass swivel joints with stainless steel balls

Single waterway low friction loss

Grease fittings for easy lubrication

Option/Accesories :

Master stream nozzle

Foam nozzle

PORTABLE DRY POWDER EXTINGUSHER

DRY POWDER EXTINGUISHER

CO² EXTINGUSHER

WATER EXTINGUISHER

FOAM EXTINGUISHER

TROLLEY DRY POWDER EXTINGUISHER

FIRE HOSE REEL

Swing Type Hose Reel

A Killfire swinging type fire hose reels are designed and tested to BSEN 671 for reliability, performance, ease of installation. They can be used without alteration for mounting with inlet to left or right of the reel. Units are tested to 20 bar without any sign of leakage or visible distortin in any part.

Hose Clip. Model KHR-25C

Hose Reel Jet / Spray Nozzle

Hose Reel Hose.

Stop Valve. Model: KHR-25V

Fixed Continuous Hose Reel

A KILLFIRE Heavy Duty Continuous Flow Hose Reel are designed for immediate and continuous flow of water all times, eliminating the need to unwind the hose before activation. Units are intended to use with non-collapsible hose and fitted with a combination Jet/Spray Nozzle.

A KILLFIRE Portable Continuous Flow Hose Reel are designed for immediate and continuous flow of water. It can be easyly be wheeled to any location to supplement existing fire protection. Unit of Ø 25 mm are intended for use with non-collapsible hose, up to 45 m and fitted with a Jet / Spray Nozzle. It is recommended to fit a flexible connection between swivel joints and inlet pipe to avoid damages.

Portable Continuous Hose Reel

Fire Fighting Suit in Compliance to MED TEMPEX-Fire Protection Suit TX 14

Set TX 14Fire Protection Suit : For outer fabric see below. Jacket JKF 4,800 mm long. Trousers HSF 4. Head guard KH 3: Designed for fire helmet. Chin strap. Alumunium mounting for curved visor window 100 x 220 mm. Window: Polycarbonate, gold plated. Five-finger gloves: 340 mm long. back of hand and gauntlet of KF 1/Z Kevlar/glass 390 g/m². Palm of heat-resistant chrome split leather. Lined inside. Gaiter GK: 180 mm high, of K 2/K Kevlar/glass 680 g/m². Bag: 450 x 180 x 350 mm. Weight complete: 3000 g.

Killfire Mobile Foam Trolley

Main Features :

120 Litres Capacity

Highly Mobile

One-man Operation

Suitable for All Types of Foams

Large Diameter Filler Cap

The Mobile Foam Trolley has been designed for one-man rapid deployment and is ideal for protection of oil storage and loading terminals, paint or solvent stores, boiler rooms, ships engine room and other similar risk areas. The unit only requires a pressurised water supplay for operation. manufactured in high strength corrossion resistant materials.SPECIFICATIONFoam Concentrade Storage Tank120 Litres capacity chemically resistant, GRP tank suitable for storing all types of concentrates. Finish : YellowFrame & Hose RackSteel Construction. Finish : Black Enamel

STANDARD ACCESSORIESInline Variable EductorCast brass construction with 0-6% selector metering valve. Include ¾" OD wire reinforced PVC foam pickup tubing.Flow : 95 gpm (360 Lpm) at 13.8 bar (200 psi) 60 gpm (227 Lpm) at 6.9 bar (100 psi)Inlet : 2,5" male instantaneous (Bs336) or 1,5" male NHTOutlet : 2,5" female instantaneous (BS336) or 1,5" female swivel NHTFire HosesSingle jacket polyester jacket with an internal EPDM rubber lining. White colour. Working pressure 240 psi (17 bar)Option : Synthetic polymide/polyester woven textile reinforced with an unified nitrile-PVC cover. Red colour. Complies to BS6391. Working pressure 17 bar. Two lengths of 20 m x 2" BS6391 compliant Type 3 fire hoses and British instantaneous coupling.Options : American NHT threaded brass couplings.Foams BranchpipeAnodized aluminium NH 1,5"/2,5" female thread used where foam is required to be applied, used with premixed water-foam solution.Flow : 60 gpm (227 lpm) at 5.0 bar Expansion ratio : 1 to 15Throw : 26 metersOther types of fittings to customer"s requirements ara available. For example, German storz, machino, etc.Option for lange flows on eductors and foam branchpipes are also available upon request.Complete Unit with standard accessories weighs about 49 kgs (no foam).

SYNTEX 500